dyson v6 how to clean filters

dyson v6 how to clean filters

How to Clean Filters on a Dyson V6

Maintaining your Dyson vacuum filter is a must, especially if you want to extend its life. The filter captures microscopic particles, but over time these can build up and affect the suction power of your Dyson v6.

When this happens, your vacuum may turn off unexpectedly. It can also make strange noises or smells.

How often should I clean my Dyson filter?

The Dyson filter is an important part of the vacuum cleaner’s system, and it should be cleaned regularly. It helps capture and contain tiny dust particles that can block airflow, which can make your machine lose suction power.

The best way to clean a filter is to rinse it under water. This is a quick and easy process, as you don’t need any detergents or soaps. Simply run cold water to the filter, cover the open ends, and shake it gently until the water runs clear.

It is important to let the filter dry completely before reinstalling it into your vacuum. You can do this by placing it in a warm area for 24 hours, but don’t put it in the dryer or near an open flame.

This step is often overlooked, but it’s one of the most crucial – you’ll never know how much dust has built up between the paper and plastic filter parts.

This can lead to clogging and a smelly mess, so cleaning the filter is essential. Dyson recommends cleaning your filter at least once a month.

How To Clean Your Dyson Filter In 5 Steps – And Ho

If you’ve been using a Dyson vacuum cleaner for a while and it no longer seems to be as good as it used to be, you might need to give it a good clean. Cleaning your filter will make a huge difference to how well it sucks up dust, dirt, and debris.

The vacuum filters in your Dyson vacuum cleaner collect and trap all the particles that come into contact with it. However, over time these can become clogged, reducing their effectiveness and impacting on your vacuum’s suction power.

What Your Doctor Isn’t Telling You About Diabetes ? CLICK HERE TO WATCH 

Doctors are urging every American with type II diabetes
to read this trending news story:




To clean your Dyson filter, you’ll need a few simple tools. First, you’ll need to remove the filter from your vacuum – this can be done with a flathead screwdriver or a coin (depending on the model of your Dyson).

Once the filter has been removed, rinse it off thoroughly under cold water both inside and out. Then, hold it over the sink and shake it to help dislodge any remaining particles.

Repeat this process until the water is clear – you may need to do it several times. Once the filter is completely clean, it’s time to put it back into your vacuum.

This should elongate the life of your Dyson vacuum, as it’ll ensure that all parts of the cyclone are clean and that your floors are being properly cleaned. It’s also a good idea to deep clean your vacuum once every three or four months – this will get rid of any dirt that might be trapped in the cyclone and helps your machine work even more efficiently.

Switch off and unplug your Dyson vacuum

If you have a Dyson vacuum, you probably know that it’s important to keep your filters clean. Filters are designed to capture microscopic dust particles in order to improve the performance of your machine and prevent it from overheating.

You should clean your filters regularly, usually every month and aim to replace them when they become clogged up or frayed. These steps will help your Dyson cleaner work as effectively as possible and also prolong its lifespan.

Your filter is located inside your vacuum cleaner on the top or back of the body, close to the motor or inserted in it. You can typically remove these filters by unscrewing them and lifting them out of your vac.

Some Dyson vacs have more than one filter, and you should swap them around during cleans so that your vac can run as smoothly as possible.

A full bin can trigger your vacuum to turn off prematurely, so check that it’s completely empty before you begin using your vac.

If your vacuum won’t run for longer than 10 minutes when you use it, there could be a problem with the battery or electrical connection. In this situation, it’s recommended that you switch it off and let it charge for at least half an hour to make sure the problem has been resolved.

Rinse Your Dyson Filter Out

When your Dyson filter becomes clogged with dust, dirt and debris, it can cause your vacuum to lose suction power. It can also cause it to cut out or pulsate, which will impact your cleaning performance.

The good news is that you can easily clean your Dyson filter at home with a few simple steps. The first step is to switch off and unplug your vacuum cleaner (if it’s a cordless model).

Next, locate the filter on the back of the main body, which is typically purple in colour. Simply twist it anti-clockwise to remove it from the machine.

Once removed, tap the filter lightly on the side of a bin or garbage can to remove any loose dirt and debris. Leave the filter to dry for 24 hours before re-fitting into your machine.

Repeat the process until the water runs clear and the filter is clean. Then firmly shake the filter to remove any excess water.

You should rinse your Dyson filter out with warm tap water before re-fitting it to your machine. Do not use detergent or wash it in a dishwasher or washing machine, as this could damage your filter.

Watch the video for filter cleaning tips

The filter of your Dyson vacuum is one of the most important parts of your machine. It helps to capture dust, pollen and other tiny particles before they are released into your air, ensuring your home is clean.

It’s important to keep your filter clean to help it last longer and maintain the efficiency of your Dyson. Clogged filters can affect the suction power of your vacuum, causing it to work less efficiently.

Fortunately, cleaning your Dyson filter is pretty simple, but you should always check the user manual for the model of your vacuum. It will have specific instructions for you to follow to ensure the best results.

To start with, you’ll need to unplug your vacuum and remove the cyclone assembly from the machine. Then, you’ll need a pair of gloves and a mask for safety reasons.

Once you have removed the cyclone assembly, look for the bin release button on your model (depending on which model you have). Press this to empty the debris into the trash bin.

Next, you’ll need to wash out the dust canister. You should only use water or a damp cloth and no detergents as they can make it sticky.

Easy step-by-step guide on how to clean your vacuu

Your vacuum’s filters need cleaning every now and then to keep it working at its best. They help filter out dust and other debris before it can get in your home, reducing the risk of allergy triggers or dust mites.

Depending on the model, your vacuum has different filters, including foam, HEPA and cartridge types. These are all made of different materials, so how you clean them depends on their type.

Some filters are washable, which makes them easy to clean. Others are not, and this will be noted in your vacuum’s manual.

The vacuum’s filter may also have an indicator light that comes on to let you know when it needs to be changed. To clean the filter, remove it from your vacuum and follow the manufacturer’s instructions.

Many filters are washable, and can be cleaned in warm water with a mild detergent. Rinse them off and allow them to dry fully before putting them back in your vacuum.

Before you start, you’ll need to gather together all the tools and essentials you’ll need to clean your vacuum. This includes screwdrivers and a bin bag to catch any dust that’s released when the filter is cleaned.

Watch the video for filter cleaning tips

A dirty filter can reduce the suction of your Dyson, and will need cleaning on a regular basis. Keeping your filter clean can help to prolong the life of your vacuum cleaner, and will keep your home looking and smelling fresh.

Filters in Dyson vacuums are designed to catch and trap small dust particles, and these can build up over time. They can also clog, which will impact the working efficiency of your vacuum.

Luckily, it’s easy to keep your Dyson filter clean. All you need is some water, a filter, and a few minutes of your time.

To get started, remove the clear bin from your vacuum and unplug it. Next, lift out the pre-motor filter from the top of the main body.

Rinse the filter with cold water until it’s completely clear. Never use hot water or a washing machine for this step, as it could damage the filter.

Once you’ve cleaned the filter, allow it to dry for at least 24 hours before putting it back in your Dyson. The team at Dyson warn that you should not dry your filter in a tumble dryer or in direct heat, as this can cause the filter to break down.

Maintain your vacuum filter. Extend its life

Dyson’s cordless vacuum filter technology captures microscopic particles. Overtime they accumulate on the filter, which affects its efficiency. When you wash the water twice weekly you can improve suction strength.

How To Clean Your Dyson Filter In 5 Steps – And How To Know If You Need A New Filter

Do vacuum cleaners clean homes? I don’t think it would make sense to you unless you have a vacuum cleaner that hasn’t been cleaned in ten years. Many people do not realize that vacuums require regular cleaning every few times. If your investment has long lasting value, it’s worth taking some time for a regular cleaning. We’ll show you what’s necessary in cleaning Dyson filters, please click here.

Rinse Your Dyson Filter Out

Use warm water to wash & rinse Dyson Filters in the sink. Dyson suggests using only soap to rinse the air filters off. Cold water suffices. Never put a filter in the dishwasher. The water is filtered by gentle pressure in a water filtration machine and repeat this until it runs clean.

Remove the filter

First remove this filter. It can be very simple for Dysons – the filter component is always purple so just twist it out and pull it out. Almost everyone in the public opinion starts here. But the two-step process is extremely difficult even for those with extra work. Once the filter has been removed you realise the reasons behind the filter’s design.

Let Your Dyson Filter Dry

Before you put the filter back in the vacuum, you must dry it thoroughly before removing the vacuum filter. If possible, you can leave these on the floor for 24 hours until they dry out. Never store under a dryer or under a burning lamp.

Remove your Dyson filter(s)

Discard Dyson filters.

Watch the video for filter cleaning tips

Click on a machine to find out the cleaning procedure for that particular machine.

Rinse out with cold water

You can also rinse the paper filters and the plastic parts thoroughly before you wash the filter. The soaps are not necessary. Always keep your hands warm when it is cold. Don’t soak the filter too long, just rinse it out.

Easy step-by-step guide on how to clean your vacuum filter

We developed vacuum systems that are easy to operate and easy to maintain. The filtration system must be maintained once a month to ensure optimal operation of the computer.

Leave to dry for 24+ hours

Afterwards you should clean the filters and allow them to dry for 24 hours in airy areas like beside the fans. If they are not properly dry, they might damage the drive system. Do physical testing on a clean surface before removing filter.

Leave a Reply

Your email address will not be published. Required fields are marked * is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to