This film includes subtitles. To get the most out of our videos we recommend viewing with subtitles turned on.
When you detect a blockage, your Dyson Gen5detect™ Outsize cordless vacuum’s motor will pulse several times and automatically turn the suction off. An alert will appear on your LCD screen saying ‘Airway obstructed’.
Before you check for blockages, make sure your machine is turned off and be careful of sharp objects.
The LCD screen will show you the key areas to check for blockages. It’s also a good idea to wash the filter unit – in normal use, you should do this at least once a month. Click here for our video guide.
Our experts are available to help, so leave us a comment if you need further advice. You can also find support online here.
Did this video resolve your issue? Like if it did, or leave a comment. 👍🏼 Today, we’re going to show you how to locate and remove blockages on your Dyson Gen5detect™ Outsize cordless vacuum. When a blockage is detected, your machine’s motor will pulse and the suction will automatically turn off. The LCD screen will display an alert saying ‘Airway obstructed’. Before you begin checking for blockages, always make sure that your machine is turned off and be cautious of any sharp objects. The LCD screen will guide you to the key areas where blockages are most likely to occur. Additionally, it’s a good practice to wash the filter unit at least once a month to ensure optimal performance. If you want a step-by-step visual guide, we recommend watching our video tutorial, which includes subtitles for a better understanding. If you found this video helpful, give it a thumbs up or leave a comment!
To begin removing blockages, start by removing the wand and emptying the bin. Hold the machine over a bin, making sure it points downwards. Firmly push the red release lever, then press the red button to release the bin and slide it down. Check the main bin inlet for any blockages and remove any debris you find. Remember to also examine the small inlet on the side of the cyclone and clear any debris from there. To reattach the bin, insert the spine into the runner, close the lid, and push it until it clicks into place. Next, remove the cleaner head from the wand and check the neck of the cleaner head for any debris. Ensure that the airways are not blocked. Also, inspect the wand for any debris and ensure it is clear. Securely refit all parts after removing any blockages. Once you’ve completed these steps, power on your machine and continue with your cleaning tasks.
How to locate and remove blockages on Dyson Gen5detect™ Outsize cordless vacuum
Introduction
Cleaning can sometimes become a cumbersome task with all the nooks and crannies that collect dust and debris. When it comes to your Dyson Gen5detect™ Outsize cordless vacuum, blockages can become an issue that hinder its optimal performance. Fortunately, locating and removing these blockages is a simple process that can be done in just a few steps. In this guide, we will take you through each step, ensuring that your vacuum is free from any obstructions and ready to tackle your cleaning needs.
Step 1: Turn off the machine and be cautious
The first step in locating and removing blockages from your Dyson Gen5detect™ Outsize cordless vacuum is to turn off the machine. This ensures your safety while working on the device. Additionally, be cautious about sharp objects that may be present in the vacuum. It’s always better to be safe than sorry, so take a moment to inspect the area and remove any potential hazards before proceeding further.
Step 2: Remove and check the bin
To begin checking for blockages, you’ll need to remove the bin from your Dyson Gen5detect™ Outsize cordless vacuum. First, remove the wand from the machine. This will allow easier access to the bin. Once the wand is detached, hold the vacuum over a bin and point it downwards to empty the bin. Next, locate the red release lever on the bin and firmly push it. This will unlock the bin from the machine. Finally, press the red button to release the bin and slide it down to completely remove it.
Step 3: Check the main bin inlet
With the bin removed, it’s time to check the main bin inlet for blockages. Take a moment to inspect the main bin inlet, which is the opening where the bin attaches to the machine. Thoroughly examine this area and remove any debris or blockages that may be present. Using your fingers or a soft brush, gently remove any obstructions to ensure proper suction.
Step 4: Check the small inlet on the side of the cyclone
Moving on, locate the small inlet on the side of the cyclone. This small inlet is often overlooked but can be a common area for blockages. Take a close look at this area and remove any debris that may have accumulated. Use gentle motions to dislodge and remove any obstructions, ensuring that the small inlet is clear and unobstructed.
Step 5: Remove and check the cleaner head
Now, it’s time to remove the cleaner head and check for blockages. Detach the cleaner head from the wand by pressing the release button and sliding it off. Once removed, thoroughly inspect the cleaner head for any debris that may be causing blockages. Pay close attention to the bristles, as hair and fibers tend to get tangled here. Remove any obstructions and ensure that the cleaner head is clean and free from any clogs.
Step 6: Check the neck of the cleaner head
After examining the cleaner head, focus your attention on the neck of the cleaner head. This area connects the cleaner head to the wand and can also collect debris over time. Take a moment to examine the neck and remove any blockages that may be present. Clearing this area will ensure optimal airflow and suction when using the vacuum.
Step 7: Check the airways of the cleaner head
Now, it’s time to inspect the airways of the cleaner head. These airways are responsible for suction and can get clogged with dirt and debris. Make sure the airways are unobstructed and remove any debris that may be restricting the airflow. A soft brush or a small tool can be helpful in clearing out this area. Take your time to ensure the airways are completely clear.
Step 8: Remove and check the wand
Next, remove the wand completely from your Dyson Gen5detect™ Outsize cordless vacuum. Inspect the wand for any blockages, paying particular attention to the area where it connects to the cleaner head. Clear out any debris that may have accumulated to ensure proper suction.
Step 9: Ensure all parts are securely refitted
After thoroughly checking and removing any blockages, it is essential to ensure that all the parts are securely refitted. Start by attaching the bin back to the vacuum body. Slide it up until you hear a click, indicating that it is securely in place. Reattach the wand and cleaner head, ensuring they snap back into position correctly. Double-check that all parts are properly fitted, as loose connections can affect the overall performance of the vacuum.
Step 10: Power on the machine and continue cleaning
With all blockages removed and all parts securely refitted, it’s time to power on your Dyson Gen5detect™ Outsize cordless vacuum and continue cleaning. Turn on the machine and test its suction power. You should notice a significant improvement in performance now that any blockages have been eliminated. Enjoy your newly rejuvenated vacuum and its ability to effortlessly tackle dirt and debris.
Conclusion
Keeping your Dyson Gen5detect™ Outsize cordless vacuum running smoothly is essential for efficient cleaning. By following these ten simple steps, you can easily locate and remove any blockages that may be hindering the performance of your vacuum. Remember to always turn off the machine before checking for blockages and be cautious of sharp objects. Regular maintenance and cleaning will keep your vacuum in top shape, allowing you to enjoy a cleaner and healthier living environment.