Why Does My Dyson Airwrap Keep Shutting Off?
The Dyson Airwrap is one of the top hair styling tools on the market. Its innovative blow-dryer and straightening attachments set it apart from other similar devices.
Airwrap’s filter mesh blocks dust, dirt and other impurities from entering the hair styler. However, over time these particles may accumulate and restrict airflow.
1. Filter mesh is clogged
If your Dyson airwrap keeps shutting off, it could be due to an issue with its filter mesh. A clogged filter can cause your machine to malfunction, so cleaning it regularly is key for keeping it running optimally and for extended use. This will guarantee that your device works efficiently and lasts for years to come.
Your Airwrap’s filter mesh protects the motor from debris and dust, so it’s essential to keep it clean. Doing so could lead to overheating and eventual device malfunction.
A clogged filter can cause your machine to run slowly, making it difficult for you to style your hair. To resolve this problem, take out the filter and clean it thoroughly.
Cleaning the filter on your Airwrap will improve the air quality it draws in. Once you’ve done that, you can reinstall it for optimal performance.
To clean the filter, start by gently brushing away any dirt or dust from it with a soft brush. Afterwards, you can soak it in water for several minutes to flush away any residue that had built up. After being clean, reinstall the filter and run a test cycle to verify its functionality.
Finally, verify that your Airwrap’s ducts are correctly connected to its attachments. Doing this will guarantee your machine runs optimally and help you avoid having to replace any attachments in the future.
Make sure the power cord is securely attached and not damaged. Failure to do so could lead to malfunctioning of your device, so make sure it’s secure.
Another possible explanation for why your Dyson airwrap may not be working is an issue with voltage setting. This can be due to either a bad connection to the wall socket or damaged wires. To resolve this issue, contact a certified electrician.
Finally, if the issue is caused by a power outlet, contact an experienced electrician for assistance in troubleshooting and fixing the problem quickly.
2. The motor is overheating
The Dyson Airwrap is an incredibly versatile hair styling tool, capable of creating curls, straight strands or wavy layers. If you own one, it can be frustrating when your styler suddenly stops working without warning.
When your Dyson Airwrap stops working, it’s essential to address the problem promptly before it leads to more serious issues. Fortunately, there are only a few reasons why your Airwrap may suddenly stop working.
1. Your Dyson Airwrap’s motor may be overheating
Your Dyson Airwrap’s motor generates a great deal of heat as it blows air to style your hair. If the temperature rises too high, an automatic switch-off takes place – protecting the device from melting its components. This safety feature keeps things running smoothly in the event that an accident does occur.
To prevent the motor from overheating, set your Airwrap at low heat settings and take breaks every few minutes when using it. Doing this will allow the device to cool down before shutting off completely.
2. Clogged Filter Mesh
Airwrap’s filter is made up of multiple layers of fine mesh that trap dust and dirt before entering the device. If this mesh becomes clogged, it can restrict airflow and cause your device to overheat.
Thankfully, cleaning the mesh on your device is a simple and quick process. All you have to do is follow these simple instructions for getting everything back up and running smoothly.
First, remove the filter cage from the bottom of your Airwrap and use a cleaning brush to gently rotate it on the mesh area to loosen any debris stuck inside it. After you finish, let dry for several hours before inserting back into your device.
3. Damaged Power Cord or Plug
If your Dyson Airwrap suddenly shuts off, it could be due to damage to either its power cord or plug. Damages like rips and tears in these components may prevent connection to a wall socket.
3. The voltage is incorrect
When your device is plugged into an outlet, it may not be receiving enough power. This can happen for various reasons such as damage to the power cord or plug, blown fuses, and issues with your home’s electrical supply.
In order to resolve this problem, you will need to adjust the voltage settings on your Dyson airwrap. You can do this by consulting its user manual or contacting its manufacturer directly.
Your airwrap should receive a voltage of 110 volts or higher to operate properly. If not, it will shut off immediately.
This is a common issue that may cause your airwrap to stop working and flash red. It could also signal a more serious issue that requires extensive repairs.
Commonly, this is due to a dirty filter preventing proper airflow through the device. To keep this part clear and unclogged, regularly cleaning it is essential.
Without regular filter cleaning, your Dyson airwrap may experience overheating and shutoff, making it difficult to use.
As a safety measure, the manufacturer of your airwrap has implemented a system that detects fouling of the filter and turns off the device. Doing so prevents your Airwrap from overheating, which could damage internal components such as motor or electronic card.
In most cases, this issue is straightforward to resolve. In addition to cleaning the filter, you can use a small brush to gently scrape away any dirt from its grid and base.
However, if you are having difficulty with this step or haven’t cleaned your filter in some time, calling the Dyson helpline for assistance is probably best. They will guide you through the process and guarantee that your device functions optimally once again.
Your Dyson airwrap may keep shutting off due to an issue with its power outlet. This can be caused by damage or malfunction of either a power cord or plug, wiring issues or blown fuses. In some cases, this issue can be corrected by adjusting the outlet or replacing both components.
4. The power outlet is not working
If your Dyson airwrap keeps shutting off, it could be due to a problem with the power outlet. This can be an incredibly frustrating situation since it prevents you from using your device.
You can troubleshoot this issue by checking the outlet and making sure it’s properly connected. If your device still won’t power on, it could be time to replace the power cord or plug.
Another possible explanation for your Dyson airwrap not turning on may be due to clogged filter mesh. This can happen due to dirt or dust accumulation, so you should inspect it regularly for blockage. To do this, twist and slide the filter from its plug; if found, unplug the appliance and clean out any debris with a brush.
Alternatively, your device might be overheating. In this instance, it’s essential to turn off the machine and let it cool down before using again. Furthermore, avoid using your device on wet hair as this causes it to heat up more rapidly and is more prone to shutting off suddenly.
If you think your Dyson airwrap may be overheating, try reseting the device to see if that helps. If not, contact the company for assistance; they can give you advice and offer a warranty claim if there’s still no solution to the problem.
The second most likely explanation for why your device keeps shutting off is due to insufficient power supply. Your Dyson airwrap requires a steady supply of electricity in order to function optimally.
To inspect for physical damage to your device’s power cable or plug adapter, look for any signs of fraying, tears or exposed wires. In these instances, it could be time to replace both items.
A malfunctioning wall socket or circuit breaker could be to blame for this issue, so it’s essential to inspect them both before attempting any fixes yourself. If it turns out that the wall socket needs repair, you’ll need to contact a qualified electrician for assistance.