How to clean your Dyson Gen5detect™ cordless vacuum’s washable parts

To clean the washable parts of your Dyson Gen5detect™ cordless vacuum, follow these steps:

1. To ensure the best viewing experience, we recommend watching the video with subtitles turned on.

2. Before washing any parts or tools, please refer to the online user manual for complete instructions.

3. After washing, leave all parts to dry completely for at least 24 hours. Use a dry lint-free cloth to thoroughly dry the bin. Make sure all parts or tools are completely dry before using them.

4. It is important to remember that tools and any other part of your machine should not be submerged. Avoid putting any part of your machine in a dishwasher or using detergents, polishes, or air fresheners.

If you need further assistance, our experts are here to help. Feel free to leave a comment for additional advice. You can also find support online.

If this video resolved your issue, please like it or leave a comment. 👍🏼 Today, we’re going to show you how to clean the washable parts of your Dyson Gen5detect™ cordless vacuum. This informative video by Dyson provides step-by-step instructions and includes subtitles for easy understanding. Before washing any parts or tools, it’s essential to refer to the online user manual for full details. Afterward, leave all the parts to dry for a minimum of 24 hours to ensure they are completely dry before use. Remember, it’s crucial not to submerge any part of your machine, put it in a dishwasher, or use detergents, polishes, or air fresheners. If you find this video helpful, consider giving it a thumbs up or leaving a comment!

In the video, you’ll learn various cleaning techniques for different parts of your Dyson Gen5detect™ cordless vacuum. For example, you’ll discover how to remove and clean the brush bar, wipe clean the head and illumination, and even wash the filter unit. Remember to follow the instructions carefully, ensuring the brush bar and all tools are thoroughly dry before reassembling. You’ll also be guided on how to empty the bin and clean it effectively, ensuring that the rubber seals are completely dry before putting it back into your machine. Watch the video for more details on how to keep your Dyson Gen5detect™ cordless vacuum’s washable parts in tip-top condition!

How to clean the brush bar

Cleaning the brush bar of your Dyson Gen5detect™ cordless vacuum is essential to maintain its performance. Follow these simple steps to effectively clean the brush bar:

1. Push the end cap up fully and pull out the brush bar from the cleaner head.
2. Remove the end cap and set it aside, as it should not be washed.
3. Hold the brush bar under tap water and gently rub it to remove any lint or dirt.
4. Remove as much excess water as possible from the brush bar.
5. Stand the brush bar upright and leave it to dry for at least 24 hours. It is crucial to ensure that the brush bar is completely dry before refitting.
6. Once the brush bar is dry, reattach the end cap.

By following these steps, you can keep your brush bar clean and maintain the efficiency of your Dyson Gen5detect™ cordless vacuum.

How to clean the cleaner head and illumination

The cleaner head and illumination of the Dyson Gen5detect™ cordless vacuum also require regular cleaning. Here’s how you can effectively clean them:

1. Using a clean dry cloth, wipe clean the cleaner head and illumination.
2. Take care to align the end cap correctly when wiping.
3. Position the end cap at a 45-degree angle to ensure it can be pushed down into place.
4. Hold a lint-free cloth under water to dampen it.
5. Wring out the cloth to remove excess water.
6. Use the damp cloth to wipe all other tools of the vacuum.
7. Make sure all the tools are completely dry before using them again.

By following these steps, you can ensure that the cleaner head and the illumination of your Dyson Gen5detect™ cordless vacuum are clean and ready for use.

How to clean the filter unit

Properly cleaning the filter unit of your Dyson Gen5detect™ cordless vacuum is crucial for maintaining its filtration and suction power. Follow these steps to clean the filter unit effectively:

1. Twist the filter unit anti-clockwise to remove it from the vacuum.
2. Tap the filter unit gently to remove any excess dust and debris before washing it.
3. Wash the filter unit using water only. Avoid using any detergents or cleaning agents.
4. Run water over the pleated paper and the inside of the foam element. Rub gently to remove any dirt.
5. Hold the filter unit on its side and run warm water over the outside of the foam element, gently rubbing to remove dirt.
6. Repeat the washing process until the water runs clear.
7. Shake the filter unit to remove excess water and leave it to dry for at least 24 hours in a warm place with good airflow.
8. Before refitting the filter unit, check if it is completely dry to prevent damage to the motor.
9. Twist the filter unit clockwise to secure it back into place.

Following these steps will ensure that your filter unit is clean and functioning optimally, allowing your Dyson Gen5detect™ cordless vacuum to maintain its suction power.

How to clean the bin

Regularly cleaning the bin of your Dyson Gen5detect™ cordless vacuum is essential to maintain its efficiency. Here’s how you can clean the bin effectively:

1. Empty the bin before the dirt reaches the MAX line to prevent overfilling.
2. Hold your vacuum over a bin, pointing it downwards.
3. Firmly push the red release lever to open the bin.
4. Press the red button to remove the bin from the vacuum.
5. Wipe the bin clean using a damp lint-free cloth.
6. Ensure that all parts of the bin, including the rubber seals, are completely dry before refitting them into the machine.
7. Slide the bin back onto its runner.
8. Close the lid of the bin and push to click the bin and base into place.

By following these steps, you can keep your bin clean and maintain the optimal performance of your Dyson Gen5detect™ cordless vacuum.

Important tips for washing parts

When cleaning the washable parts of your Dyson Gen5detect™ cordless vacuum, it is essential to keep the following tips in mind:

1. Refer to the user manual for full details before washing any parts. The manual provides specific instructions for each part and will ensure you clean them correctly.
2. Ensure that all parts are completely dry before using them again. Damp or wet parts can affect the performance of your vacuum.
3. Do not submerge any part of the machine in water. Submerging electronic components can cause damage.
4. Avoid using a dishwasher, detergents, polishes, or air fresheners on any part of the vacuum. These substances can damage the materials and affect the performance of the machine.

By following these tips, you can clean the washable parts of your Dyson Gen5detect™ cordless vacuum safely and effectively.

Conclusion

Properly cleaning the washable parts of your Dyson Gen5detect™ cordless vacuum is crucial for its performance and longevity. By following the step-by-step instructions outlined above, you can ensure that your vacuum remains in top condition, providing efficient cleaning for years to come. Remember to refer to the user manual for detailed instructions and always allow the parts to dry completely before using them again. With proper maintenance, your Dyson Gen5detect™ cordless vacuum will continue to deliver outstanding cleaning performance.