Your Dyson airwrap is one of the most versatile styling tools in your haircare arsenal. It can quickly create straight locks, curls, or wavy layers in no time.
Therefore, it’s essential to keep your Dyson airwrap in optimal working condition in order to avoid any unexpected problems. If the styler has stopped working, there are a few steps you can take to troubleshoot the problem and ensure its success.
Power cord
The power cord is an essential component of your Dyson airwrap. If it’s damaged, it will stop working and cause the styler to shut down. Therefore, make sure you inspect for any signs of damage on the cord or plug before using the device for the first time.
Another potential problem could be an accidental rip or tear to your power cord. This is a common occurrence and should be addressed right away to avoid further harm.
Additionally, ensure your Airwrap cord is securely attached and plugged into the outlet correctly. If not, it may be time to replace it.
If the cord of your Dyson airwrap has been torn or ripped, it’s critical to address the problem promptly. That is why reaching out to Dyson customer service as soon as you notice an issue is a wise idea.
Another possible explanation for why your Dyson airwrap may not function properly is a clogged filter. This issue is easily fixed by cleaning the filter.
It’s essential to remember that the filter in your Dyson airwrap should be cleaned prior to each use. Failure to do so on a regular basis could result in your device malfunctioning and not functioning properly.
Another major cause of why your Dyson airwrap may not be turning on is that the power supply to your wall socket has failed. This can occur for various reasons, including a tripped circuit breaker or damaged socket.
If your Airwrap starts flashing white or red light on its display, it could be indicative of overheating, low battery power or need for filter replacement. To resolve this issue, unplug the device and allow it to cool for at least 15 minutes before plugging it back in again.
Filter
If your dyson airwrap has stopped working for you, there could be several causes. Fortunately, there are steps you can take to fix these issues and get your device back up and running.
Before anything else, check that both your power cord and plug are functioning correctly. A damaged power cord won’t be able to connect to an outlet, whereas bent or broken prongs on a plug won’t hold enough electricity for proper power supply – thus stopping your device from working.
Next, inspect the filter to make sure it’s free from dirt or debris. A dirty filter can restrict airflow into the machine and cause it to shut down prematurely – especially in devices stored for extended periods of time or areas with lots of dust or dirt.
One of the quickest and most straightforward ways to get your dyson airwrap back up and running is cleaning its filter. This easy step will keep your device operating optimally and help it last longer.
To clean an appliance, first switch off the appliance and unplug it. Afterward, take out the filter and rinse with cold water; this will help clear away any visible dirt or debris as well as that which has built up over time.
Finally, make sure the filter has completely dried before reattaching it to the machine. Wet filters won’t function optimally and may even prevent your Dyson airwrap from functioning altogether.
If you find that your filter is no longer as effective at trapping dirt and debris, replacing it is time for a fresh start. Not only will this extend the life of your device but it will also make it more efficient at collecting particles like dirt and grime.
As a general guideline, it’s recommended to change the filter on your dyson airwrap every six months to a year. However, this depends on how often you use your device and the environment it operates in.
Motor
The Dyson Airwrap is an impressive hair tool that’s simple to use. Its digital motor spins at 111,000 times per minute to produce the Coanda effect – where air naturally follows an adjacent surface, pulling in and curling hair in the process.
This machine boasts an array of features, such as smart heat control that measures airflow temperature more than 40 times a second to prevent overheating. Furthermore, its thermal cutoff shuts down the machine when it senses excessive temperatures.
A Dyson Airwrap’s filter is designed to capture dirt, dust, and other impurities that could interfere with the motor’s operation. Over time these impurities accumulate and cause stress on the motor – eventually leading to its wear or failure.
Thankfully, this issue can be easily solved by regularly cleaning the filter from your machine. Simply take it out and use a brush or soft cloth to get rid of all dirt and debris that has accumulated over time.
Once the filter has been cleaned, reattach it and try operating the machine again. If any issues arise, don’t hesitate to contact a Dyson technician for assistance.
Another issue that may cause your Dyson airwrap to stop working is a damaged power cord or plug. This could be due to wear and tear, so it’s always best to replace an old cord with a new one as soon as possible.
Finally, make sure all attachments are securely fastened before using the Dyson airwrap. Otherwise, the machine may shut off unexpectedly if either they’re not correctly connected or any of its clips or pins have been damaged.
Fortunately, the dyson airwrap is designed to work with various voltage settings, making it suitable for most home outlets. If the machine isn’t functioning as expected, check if its electronic board has burned out or blown its thermal fuse. You can do this by measuring both input and output supply voltage of the appliance using a multimeter set to AC voltmeter; if they differ, then unfortunately you must replace it.
Electronics
If your Dyson airwrap has stopped working, there could be an issue with its electronics. This includes the motor, switch and electronic board which could have been damaged in some way. To correct this problem, you will need to replace all affected components.
First, inspect the power cord and plug that attaches to your Dyson airwrap for any tears, rips, or holes. If there are damages like this, the cord cannot work properly and will prevent your airwrap from functioning optimally.
Alternatively, your power cable might be damaged or worn out and needs replacing. In this instance, contact Dyson customer service to learn what options are available for replacing your cord.
Another possible explanation for why your Dyson airwrap may stop working is overheating. If you notice that it’s getting too warm, take the device out of its power source and allow it to cool off.
Additionally, inspect the air filter to see if it’s clogged. A blocked air filter can prevent your styler from functioning optimally and even cause it to overheat.
The Dyson airwrap is equipped with a set of air ducts that guarantee consistent and smooth airflow through the device. If you’re having issues getting airflow through your device, this could be indicative of dirty filters or ducts.
Once you’ve removed any obstructions in the air ducts, your Dyson airwrap should function normally again.
Additionally, test the motor and switch to determine if they have been damaged or broken. Doing this will enable you to identify the source of your issue and take immediate steps towards remedying it before things get worse.
If your Dyson airwrap still won’t function properly, you can send it back to the manufacturer for repairs. In most cases, they will be able to replace any faulty components with new ones; though this repair may be expensive, having a working device again is worth making the investment. https://www.youtube.com/embed/esR2fXWiKbw